14 repairs
Drag the handle. That’s the same job.
Every pair below is one real job, photographed before and after. Filter by what you’re dealing with.
BeforeAfterSplit seam on a leather seat
Perforated leather seat with a split seam at the bolster, re-stitched and blended back into the original grain.
BeforeAfterRV captain’s chair
Severely delaminated leather on an RV captain’s chair, stripped back and refinished in a matched color.
BeforeAfterMustang door panel insert
Disintegrating door panel insert on a Mustang, rebuilt and refinished to match the rest of the interior.
BeforeAfterHand-stitched steering wheel cover
An OEM leather cover hand-stitched onto the wheel — the before catches it part-way through. Finished, it reads as a new factory wheel rather than an aftermarket wrap.
BeforeAfterSun-perished jet ski seat
Years in the sun had left the seat chalky and split along the top edge, with the foam pushing through. Recovered in new black vinyl.
BeforeAfterGouged vinyl flooring
A gouge torn clean through the vinyl beside the cabinet, run out against a tape measure. Filled, grained and color-matched back into the floor around it.
BeforeAfterDented rear quarter panel
Crease in the rear quarter of a Mercedes GLC worked out and refinished, keeping the factory paint.
BeforeAfterFaded booth backs in a sports bar
Years of service had left the channel-tufted backs chalky and hazed. Reupholstered in new blue vinyl — the seat cushions were still sound and were left as they were.
BeforeAfterTorn seat cushion on a diner bench
The vinyl had split and peeled open on the cushion, exposing the white backing underneath. Reupholstered in new vinyl. The after is the same bench from the other end.
BeforeAfterWorn tufted booth backs
Cracking along every tuft line and a corner worn through to the backing. Reupholstered in new smooth red vinyl to match the rest of the room.
BeforeAfterGouged center console armrest
Deep claw marks torn through the grain of a leather console lid. Filled and re-grained so the repair disappears into the texture around it.
BeforeAfterTuxedo-style color change in ProMerch PPS
A black CR-V finished in white ProMerch PPS with the roof and mirror caps left factory black — the white-on-black two-tone known as the tuxedo look. The coating sprays over the factory paint, so the color change and the paint protection happen in the same job.
BeforeAfterSplit seam in vinyl flooring
A split had opened along the seam with the white backing pushing up through it. Filled, grained and color-matched into the linoleum either side — in the after, that line ran straight across the middle of the frame.
BeforeAfterHazed headlight restored
Years of UV had left the lens clouded and speckled, dulling the beam. Cut back and refinished on the vehicle — the projector and reflectors read sharply again.
Next step
Have something similar?
Text us a photo of your damage and we’ll show you what the fix looks like — and what it costs.